SP ® SEALER EPOXY PRIMING FLOOR PAINT

- Excellent absorption properties, ensuring high adhesion to floor paints and most types of mortar surfaces.
- Durable with water, solvents, chemicals.
- Can be applied directly to high humidity concrete surfaces.
- Withstands relatively high mechanical compression.
- Helps conceal defects to create flatness for the floor surface, increase coverage and color fastness for the upper coating.
- Easy to apply, quick drying time

- Dust and impurities must be cleaned, grease removed by solvent or mild detergent. It is possible to spray high pressure water on the outdoor surface to remove dirt.
- Fill cracks or flatten the surface with appropriate material.
- The surface should have a good roughness to ensure good adhesion.
- Surface moisture content ≤ 4%

- Stir lightly, base part (part A) and part B by stirrer.
- Slowly pour the curing portion (part B) into the container has part A at a rate of 1 part A and 1 part B. Stir for about 3 minutes.
- Construction environment temperature: at least the surface must reach 10oC and at least 3oC higher than the dew point of the air. Surface moisture ≤ 4%. Ambient humidity ≤ 85%.
- The mixture should be used immediately, not to exceed 4 hours at 230C.
- SPTHINNER 300 or 305 can be used for thinning if necessary, not more than 2% by volume.
- Cleaning tools and equipment after application with SP®TN 300 or SP®TN 305